Chimney Flues For Sale Ireland | Stone & Stoves https://stoneandstoves.ie/product-category/flues/ Stone & Stoves Wed, 14 Oct 2026 14:12:24 +0000 en-US hourly 1 https://wordpress.org/?v=7.1.4 https://stoneandstoves.ie/wp-content/uploads/2023/11/cropped-Screenshot-2023-11-08-at-15.43.25-32x32.png Chimney Flues For Sale Ireland | Stone & Stoves https://stoneandstoves.ie/product-category/flues/ 32 32 Flashing (for flat roofs) https://stoneandstoves.ie/product/flashing-for-tiled-or-slate-roofs/ Tue, 03 Jun 2025 11:55:28 +0000 https://stoneandstoves.ie/?post_type=product&p=17080 High Temp Grey SILICONE AI-Flash – No 8 Metal Grey SILICONE 178-330mm 435×435 APPLICATION Suitable for profiled sheeting and flat panel surfaces and is temperature resistance -74°C to 260°C CONSTRUCTION Enviromentally safe lead free aluminium base. The SILICONE rubber upstand has a 20 year life. The built in 20° pitch allows adaptability to almost any [...]

The post Flashing (for flat roofs) appeared first on Stone & Stoves.

]]>
High Temp Grey SILICONE

AI-Flash – No 8 Metal Grey SILICONE 178-330mm 435×435

APPLICATION
Suitable for profiled sheeting and flat panel surfaces and is temperature resistance -74°C to 260°C

CONSTRUCTION
Enviromentally safe lead free aluminium base. The SILICONE rubber upstand has a 20 year life. The built in 20° pitch allows adaptability to almost any roof pitch including 45°. The pull tab design and easy smooth tear grooving is intended to eliminate cutting by knife and allow for a circular hole.

INSTALLATION
1. Pull tab design to correct size using pliers, alternatively cut using a stanley knife.
2.Apply silicone sealant to back of flashing.
3.Remove tiles around pipe and slide flashing over pipe.
4. Fasten Flashing to the roof.
5. Cut tile to fit to the top of the Flashing allowing the bottom of the flashing metal base to sit on top of the tiles.

The post Flashing (for flat roofs) appeared first on Stone & Stoves.

]]> 6m flexi flue https://stoneandstoves.ie/product/6m-flexi-flue/ Fri, 11 Apr 2025 09:51:07 +0000 https://stoneandstoves.ie/?post_type=product&p=16827 6m flexi flue roll only Item Quattro-PLUS Flue Liner 316L Grade – Solid Fuel Designation: EN1856-2 T600 N1 D V3 L50012 G Warranty: Lifetime Inner Material: 316L – 0.12mm thick Outer Material: 316L – 0.12mm thick Fuels: Wood, Oil, Gas, Low sulpher coal Approvals: HETAS Manufacturer: Mi-Flues Ltd Manufacture: Single Strip Seam: Quattrolock WARRANTY 316L [...]

The post 6m flexi flue appeared first on Stone & Stoves.

]]> 6m flexi flue roll only

Item Quattro-PLUS Flue Liner 316L Grade – Solid Fuel
Designation: EN1856-2 T600 N1 D V3 L50012 G
Warranty: Lifetime
Inner Material: 316L – 0.12mm thick
Outer Material: 316L – 0.12mm thick
Fuels: Wood, Oil, Gas, Low sulpher coal
Approvals: HETAS
Manufacturer: Mi-Flues Ltd
Manufacture: Single Strip
Seam: Quattrolock

WARRANTY
316L Grade Flue Liner is warranted for the lifetime of the appliance it is connected to. (conditions apply)

APPLICATION
A double skinned flexible flue liner suitable for relining within a masonry chimney. Flue liner is suitable for use with burning gas, oil, coal, coke, cured dry logs, cured dry peat.

CONSTRUCTION
The flue liner has a smooth inner liner made from 316L grade stainless steel and is 0.12mm thick. The flue liner has a convoluted outer skin made from 316L stainless steel and is 0.12mm thick. The Flue Liner is constructed from a single strip of steel which is bent at 180 degrees and then the seam is folded in four planes to give a quattrolock seal.

APPROVAL
Flue Liner is approved and listed by HETAS it is also CE approved

INSTALLATION – CHECK LIST
1.Make sure the liner will go down the chimney (this can be done by pulling down a small section of the diameter liner you will be using)
2.Sweep your chimney.
3.Check you pot is in good condition, if you are NOT using a suspended cowl then remove the pot from the stack.
INSTALLATION
Flue Liner should always be fitted from the top.
Make sure the arrows are pointing upwards (gas flow).
Secure a piece of string (at least the same length as the Flue Liner to the Nose Cone (order separately).
Now attach the Nose Cone onto the end of the Flue Liner, again making sure the arrows on the Flue Liner are pointing away from the Nose Cone in a upward direction so when the liner is installed the arrows will be pointing to the top of the chimney
Pull the liner down the chimney using the string and at the same time have someone at the top of the chimney feeding the Flue Liner down, once the Flue Liner is fitted remove the Nose Cone.
MAINTENANCE
It is recommended that chimneys serving solid fuel appliances be swept and maintained as frequently as necessary but at least once a year.

 

The post 6m flexi flue appeared first on Stone & Stoves.

]]> 9m flexi flue https://stoneandstoves.ie/product/9m-flexi-flue/ Fri, 11 Apr 2025 09:48:31 +0000 https://stoneandstoves.ie/?post_type=product&p=16823 9m flexi flue roll  Item Quattro-PLUS Flue Liner 316L Grade – Solid Fuel Designation: EN1856-2 T600 N1 D V3 L50012 G Warranty: Lifetime Inner Material: 316L – 0.12mm thick Outer Material: 316L – 0.12mm thick Fuels: Wood, Oil, Gas, Low sulpher coal Approvals: HETAS Manufacturer: Mi-Flues Ltd Manufacture: Single Strip Seam: Quattrolock WARRANTY 316L Grade [...]

The post 9m flexi flue appeared first on Stone & Stoves.

]]> 9m flexi flue roll 

Item Quattro-PLUS Flue Liner 316L Grade – Solid Fuel
Designation: EN1856-2 T600 N1 D V3 L50012 G
Warranty: Lifetime
Inner Material: 316L – 0.12mm thick
Outer Material: 316L – 0.12mm thick
Fuels: Wood, Oil, Gas, Low sulpher coal
Approvals: HETAS
Manufacturer: Mi-Flues Ltd
Manufacture: Single Strip
Seam: Quattrolock

WARRANTY
316L Grade Flue Liner is warranted for the lifetime of the appliance it is connected to. (conditions apply)

APPLICATION
A double skinned flexible flue liner suitable for relining within a masonry chimney. Flue liner is suitable for use with burning gas, oil, coal, coke, cured dry logs, cured dry peat.

CONSTRUCTION
The flue liner has a smooth inner liner made from 316L grade stainless steel and is 0.12mm thick. The flue liner has a convoluted outer skin made from 316L stainless steel and is 0.12mm thick. The Flue Liner is constructed from a single strip of steel which is bent at 180 degrees and then the seam is folded in four planes to give a quattrolock seal.

APPROVAL
Flue Liner is approved and listed by HETAS it is also CE approved

INSTALLATION – CHECK LIST
1.Make sure the liner will go down the chimney (this can be done by pulling down a small section of the diameter liner you will be using)
2.Sweep your chimney.
3.Check you pot is in good condition, if you are NOT using a suspended cowl then remove the pot from the stack.
INSTALLATION
Flue Liner should always be fitted from the top.
Make sure the arrows are pointing upwards (gas flow).
Secure a piece of string (at least the same length as the Flue Liner to the Nose Cone (order separately).
Now attach the Nose Cone onto the end of the Flue Liner, again making sure the arrows on the Flue Liner are pointing away from the Nose Cone in a upward direction so when the liner is installed the arrows will be pointing to the top of the chimney
Pull the liner down the chimney using the string and at the same time have someone at the top of the chimney feeding the Flue Liner down, once the Flue Liner is fitted remove the Nose Cone.
MAINTENANCE
It is recommended that chimneys serving solid fuel appliances be swept and maintained as frequently as necessary but at least once a year.

 

The post 9m flexi flue appeared first on Stone & Stoves.

]]> Spark catch deflector/black https://stoneandstoves.ie/product/spark-catch-deflector-black/ Tue, 08 Apr 2025 11:45:04 +0000 https://stoneandstoves.ie/?post_type=product&p=16814 The post Spark catch deflector/black appeared first on Stone & Stoves.

]]>

3″(80mm) twin wall flue: 3″(80mm) inside diameter

5″(130mm) twin wall flue: 5″(130mm) inside diameter

6″(150mm) twin wall flue: 6″(150mm) inside diameter

APPLICATION
Suitable for systems using gas, liquid (except for those with sulfur content >= 0.2% by mass) or solid (except coal and peat) fuels.

APPROVALS
HETAS Approved and is CE marked.
Designation Number
EN1856-1 T600-N1-W-Vm-L50050-G60

The system of chimney liners is designed to remove combustion products from heating devices by natural draft.
Operating temperature <= 600 °C.
Made of stainless steel EN 1.4304
The system is resistant to soot ignition, suitable for operation in dry conditions.

The post Spark catch deflector/black appeared first on Stone & Stoves.

]]> Spark catch deflector https://stoneandstoves.ie/product/spark-catch-deflector/ Fri, 26 Jan 2024 13:41:59 +0000 https://stoneandstoves.ie/?post_type=product&p=15546 The post Spark catch deflector appeared first on Stone & Stoves.

]]>

5″(130mm) twin wall flue: 5″(130mm) inside diameter

6″(150mm) twin wall flue: 6″(150mm) inside diameter

8″ (200mm) twin wall flue: 8″(200mm) inside diameter

APPLICATION
Suitable for systems using gas, liquid (except for those with sulfur content >= 0.2% by mass) or solid (except coal and peat) fuels.

APPROVALS
HETAS Approved and is CE marked.
Designation Number
EN1856-1 T600-N1-W-Vm-L50050-G60

The system of chimney liners is designed to remove combustion products from heating devices by natural draft.
Operating temperature <= 600 °C.
Made of stainless steel EN 1.4304
The system is resistant to soot ignition, suitable for operation in dry conditions.

The post Spark catch deflector appeared first on Stone & Stoves.

]]> Anti Bird / Anti Rain Chimney Cowl 8″- 9″  (Available in 3 colours) https://stoneandstoves.ie/product/anti-bird-anti-rain-chimney-cowl-8%e2%80%b3-9%e2%80%b3-available-in-3-colours/ Mon, 18 Sep 2023 11:32:02 +0000 https://stoneandstoves.ie/?post_type=product&p=14569 Anti Bird / Anti Rain Chimney Cowl 8″- 9″  This Anti Bird / Anti Rain Chimney Cowl will fit a standard chimney pot. In Ireland, a standard chimney pot measures 8 inches internal diameter. This is the most popular sized chimney pot in Ireland. Some chimney pots measure 9 inches internal diameter and this Anti [...]

The post Anti Bird / Anti Rain Chimney Cowl 8″- 9″  (Available in 3 colours) appeared first on Stone & Stoves.

]]> Anti Bird / Anti Rain Chimney Cowl 8″- 9″ 

This Anti Bird / Anti Rain Chimney Cowl will fit a standard chimney pot.

In Ireland, a standard chimney pot measures 8 inches internal diameter. This is the most popular sized chimney pot in Ireland. Some chimney pots measure 9 inches internal diameter and this Anti Bird / Anti Rain Chimney Cowl will also fit this size.

The SHL Anti Bird / Anti Rain Chimney Cowl 8″-9″ will stop birds nesting in your chimney  – it has a robust cage type stainless steel mesh housing that will prevent this.
The Anti Bird / Anti Rain Chimney Cowl 8″-9″ also protects your chimney against rain and moisture penetration – suitable for chimneys that are in use or chimneys that are used infrequently or those that are not used at all.

The Anti Rain / Anti Bird Chimney Cowl 8″-9″ is available in Black, Stainless Steel or Terracotta colours.

 

Anti Rain / Anti Bird Chimney Cowl 8″-9″ offers maximum protection without impeding the performance of the chimney.
SHL have sold over 500,000 units sold to date.

Technical:
Robust stainless steel construction powder coated terracotta.
Suitable for use with solid fuel – 1” x 1” stainless steel mesh fitted
Manufactured to EN 16475-7:2016 EN1856-1:2009, CE Marked – Guaranteed against faulty materials and workmanship.
Independently tested and certified by BSRIA UK

What the Anti Bird / Anti Rain Chimney Cowl 8″-9″ will not do:
The Anti Rain / Anti Bird Chimney Cowl 8″-9″ will not prevent a downdraught in your chimney – the Spinner Anti Down Draught Chimney Cowl or the Static Anti Down Draught Chimney Cowl will prevent a downdraught.
The Anti Rain / Anti Bird Chimney Cowl 8″-9″ will not create an up-draught or increase the performance of the chimney.
The Anti Bird / Anti Rain Chimney Cowl 8″-9″ will not completely prevent severe driving or horizontal moving rain often experienced on the coast or in elevated positions – the Static Anti Downdraught Chimney Cowl will prevent driving rain.

What comes in the pack:
1 x Anti Bird / Anti Rain Chimney Cowl 8″-9″ 
1 x strap.
1 x fixing screw and bolt.
3 x stainless steel legs – 130mm in length (are suitable for a standard chimney pot, however, if you have an ornamental / decorative chimney pot you may require Longer legs  – 205mm in length which are available as an optional extra).
6 x wing nuts to attach legs to main body of chimney cowl.

Fitting:
Anti Rain / Anti Bird Chimney Cowl 8″-9″ is very easy to fit – only a screw driver is required
Anti Bird / Anti Rain Chimney Cowl 8″-9″ will fit standard chimney pots – its circular base diameter is 9” or 230mm.
However, this cowl will fit any chimney pot between 8” and 9” (200mm and 230mm) internal diameter and 10” and 11” (254mm and 279mm) external diameter. Most chimney pots have a wall thickness of approximately 1”.

 

The post Anti Bird / Anti Rain Chimney Cowl 8″- 9″  (Available in 3 colours) appeared first on Stone & Stoves.

]]> Wall fixing bracket 3″ for pellet stoves https://stoneandstoves.ie/product/wall-fixing-bracket-3-for-pellet-stoves-2/ Fri, 17 Apr 2020 12:35:07 +0000 https://stoneandstoves.ie/product/wall-fixing-bracket-3-for-pellet-stoves-2/ SWP (with silicone gaskets) Application Connecting flue pipes are designed to connect the wood pellet heating appliance outlet and the chimney Fuel Wood pellets Designation code EN 1856-2 T200-N1-W-V2-L50XXX-G500M EN 1856-2 T200-P1-W-Vm-L50XXX-O500M Working temperature 
≤ 200 °C Steel Painted stainless steel Wall thickness 0,5 mm Distance to combustible materials ≥ 500mm* Certificate no. 1397-CPD-0183 Remark [...]

The post Wall fixing bracket 3″ for pellet stoves appeared first on Stone & Stoves.

]]> SWP (with silicone gaskets)

Application
Connecting flue pipes are designed to connect the wood pellet heating appliance outlet and the chimney

Fuel
Wood pellets

Designation code
EN 1856-2 T200-N1-W-V2-L50XXX-G500M
EN 1856-2 T200-P1-W-Vm-L50XXX-O500M

Working temperature

≤ 200 °C

Steel
Painted stainless steel

Wall thickness
0,5 mm

Distance to combustible materials
≥ 500mm*

Certificate no.
1397-CPD-0183

Remark
Chimney system suitability must
be decided by considering the documentation of the heating appliance manufacturer, chimney installation guide and national legal acts.

*The actual minimum distance to combustible material from the outer surface of a connecting flue pipe must be defined according to the designation of the product, as described in their marking, and national legal acts. If the legal acts and chimney designation indicate different admissible distances to the combustible materials, it is necessary to follow a bigger distance.

The post Wall fixing bracket 3″ for pellet stoves appeared first on Stone & Stoves.

]]> 90° tee with drain plug 3″ for pellet stoves https://stoneandstoves.ie/product/90-tee-with-drain-plug-3-for-pellet-stoves/ Fri, 17 Apr 2020 12:31:23 +0000 https://stoneandstoves.ie/product/90-tee-with-drain-plug-3-for-pellet-stoves/ SWP (with silicone gaskets)  Application Connecting flue pipes are designed to connect the wood pellet heating appliance outlet and the chimney Fuel Wood pellets Designation code EN 1856-2 T200-N1-W-V2-L50XXX-G500M EN 1856-2 T200-P1-W-Vm-L50XXX-O500M Working temperature 
≤ 200 °C Steel Painted stainless steel Wall thickness 0,5 mm Distance to combustible materials ≥ 500mm* Certificate no. 1397-CPD-0183 Remark  [...]

The post 90° tee with drain plug 3″ for pellet stoves appeared first on Stone & Stoves.

]]> SWP (with silicone gaskets) 

Application
Connecting flue pipes are designed to connect the wood pellet heating appliance outlet and the chimney

Fuel
Wood pellets

Designation code
EN 1856-2 T200-N1-W-V2-L50XXX-G500M
EN 1856-2 T200-P1-W-Vm-L50XXX-O500M

Working temperature

≤ 200 °C

Steel
Painted stainless steel

Wall thickness
0,5 mm

Distance to combustible materials
≥ 500mm*

Certificate no.
1397-CPD-0183

Remark 
Chimney system suitability must
be decided by considering the documentation of the heating appliance manufacturer, chimney installation guide and national legal acts. 

*The actual minimum distance to combustible material from the outer surface of a connecting flue pipe must be defined according to the designation of the product, as described in their marking, and national legal acts. If the legal acts and chimney designation indicate different admissible distances to the combustible materials, it is necessary to follow a bigger distance.

The post 90° tee with drain plug 3″ for pellet stoves appeared first on Stone & Stoves.

]]> 90° bend 3″ for pellet stoves https://stoneandstoves.ie/product/90-bend-3-for-pellet-stoves/ Fri, 17 Apr 2020 09:50:18 +0000 https://stoneandstoves.ie/product/90-bend-3-for-pellet-stoves/ SWP (with silicone gaskets)  Application Connecting flue pipes are designed to connect the wood pellet heating appliance outlet and the chimney Fuel Wood pellets Designation code EN 1856-2 T200-N1-W-V2-L50XXX-G500M EN 1856-2 T200-P1-W-Vm-L50XXX-O500M Working temperature 
≤ 200 °C Steel Painted stainless steel Wall thickness 0,5 mm Distance to combustible materials ≥ 500mm* Certificate no. 1397-CPD-0183 Remark  [...]

The post 90° bend 3″ for pellet stoves appeared first on Stone & Stoves.

]]> SWP (with silicone gaskets) 

Application
Connecting flue pipes are designed to connect the wood pellet heating appliance outlet and the chimney

Fuel
Wood pellets

Designation code
EN 1856-2 T200-N1-W-V2-L50XXX-G500M
EN 1856-2 T200-P1-W-Vm-L50XXX-O500M

Working temperature

≤ 200 °C

Steel
Painted stainless steel

Wall thickness
0,5 mm

Distance to combustible materials
≥ 500mm*

Certificate no.
1397-CPD-0183

Remark 
Chimney system suitability must
be decided by considering the documentation of the heating appliance manufacturer, chimney installation guide and national legal acts. 

*The actual minimum distance to combustible material from the outer surface of a connecting flue pipe must be defined according to the designation of the product, as described in their marking, and national legal acts. If the legal acts and chimney designation indicate different admissible distances to the combustible materials, it is necessary to follow a bigger distance.

The post 90° bend 3″ for pellet stoves appeared first on Stone & Stoves.

]]> 45° bend 3″ for pellet stoves https://stoneandstoves.ie/product/45-bend-3-for-pellet-stoves/ Fri, 17 Apr 2020 09:47:49 +0000 https://stoneandstoves.ie/product/45-bend-3-for-pellet-stoves/ SWP (with silicone gaskets)  Application Connecting flue pipes are designed to connect the wood pellet heating appliance outlet and the chimney Fuel Wood pellets Designation code EN 1856-2 T200-N1-W-V2-L50XXX-G500M EN 1856-2 T200-P1-W-Vm-L50XXX-O500M Working temperature 
≤ 200 °C Steel Painted stainless steel Wall thickness 0,5 mm Distance to combustible materials ≥ 500mm* Certificate no. 1397-CPD-0183 Remark  [...]

The post 45° bend 3″ for pellet stoves appeared first on Stone & Stoves.

]]> SWP (with silicone gaskets) 

Application
Connecting flue pipes are designed to connect the wood pellet heating appliance outlet and the chimney

Fuel
Wood pellets

Designation code
EN 1856-2 T200-N1-W-V2-L50XXX-G500M
EN 1856-2 T200-P1-W-Vm-L50XXX-O500M

Working temperature

≤ 200 °C

Steel
Painted stainless steel

Wall thickness
0,5 mm

Distance to combustible materials
≥ 500mm*

Certificate no.
1397-CPD-0183

Remark 
Chimney system suitability must
be decided by considering the documentation of the heating appliance manufacturer, chimney installation guide and national legal acts. 

*The actual minimum distance to combustible material from the outer surface of a connecting flue pipe must be defined according to the designation of the product, as described in their marking, and national legal acts. If the legal acts and chimney designation indicate different admissible distances to the combustible materials, it is necessary to follow a bigger distance.

The post 45° bend 3″ for pellet stoves appeared first on Stone & Stoves.

]]>