This Anti Bird / Anti Rain Chimney Cowl will fit a standard chimney pot.

In Ireland, a standard chimney pot measures 8 inches internal diameter. This is the most popular sized chimney pot in Ireland. Some chimney pots measure 9 inches internal diameter and this Anti Bird / Anti Rain Chimney Cowl will also fit this size.

The SHL Anti Bird / Anti Rain Chimney Cowl 8″-9″ will stop birds nesting in your chimney  – it has a robust cage type stainless steel mesh housing that will prevent this.
The Anti Bird / Anti Rain Chimney Cowl 8″-9″ also protects your chimney against rain and moisture penetration – suitable for chimneys that are in use or chimneys that are used infrequently or those that are not used at all.

The Anti Rain / Anti Bird Chimney Cowl 8″-9″ is available in Black, Stainless Steel or Terracotta colours.

Anti Rain / Anti Bird Chimney Cowl 8″-9″ offers maximum protection without impeding the performance of the chimney.
SHL have sold over 500,000 units sold to date.

Technical:
Robust stainless steel construction powder coated terracotta.
Suitable for use with solid fuel – 1” x 1” stainless steel mesh fitted
Manufactured to EN 16475-7:2016 EN1856-1:2009, CE Marked – Guaranteed against faulty materials and workmanship.
Independently tested and certified by BSRIA UK

What the Anti Bird / Anti Rain Chimney Cowl 8″-9″ will not do:
The Anti Rain / Anti Bird Chimney Cowl 8″-9″ will not prevent a downdraught in your chimney – the Spinner Anti Down Draught Chimney Cowl or the Static Anti Down Draught Chimney Cowl will prevent a downdraught.
The Anti Rain / Anti Bird Chimney Cowl 8″-9″ will not create an up-draught or increase the performance of the chimney.
The Anti Bird / Anti Rain Chimney Cowl 8″-9″ will not completely prevent severe driving or horizontal moving rain often experienced on the coast or in elevated positions – the Static Anti Downdraught Chimney Cowl will prevent driving rain.

What comes in the pack:
1 x Anti Bird / Anti Rain Chimney Cowl 8″-9″ 
1 x strap.
1 x fixing screw and bolt.
3 x stainless steel legs – 130mm in length (are suitable for a standard chimney pot, however, if you have an ornamental / decorative chimney pot you may require Longer legs  – 205mm in length which are available as an optional extra).
6 x wing nuts to attach legs to main body of chimney cowl.

Fitting:
Anti Rain / Anti Bird Chimney Cowl 8″-9″ is very easy to fit – only a screw driver is required
Anti Bird / Anti Rain Chimney Cowl 8″-9″ will fit standard chimney pots – its circular base diameter is 9” or 230mm.
However, this cowl will fit any chimney pot between 8” and 9” (200mm and 230mm) internal diameter and 10” and 11” (254mm and 279mm) external diameter. Most chimney pots have a wall thickness of approximately 1”.

The post Anti Bird / Anti Rain Chimney Cowl 8″- 9″  (Available in 3 colours) appeared first on Stone & Stoves.

Application
Connecting flue pipes are designed to connect the wood pellet heating appliance outlet and the chimney

Fuel
Wood pellets

Designation code
EN 1856-2 T200-N1-W-V2-L50XXX-G500M
EN 1856-2 T200-P1-W-Vm-L50XXX-O500M

Working temperature

≤ 200 °C

Steel
Painted stainless steel

Wall thickness
0,5 mm

Distance to combustible materials
≥ 500mm*

Certificate no.
1397-CPD-0183

Remark
Chimney system suitability must
be decided by considering the documentation of the heating appliance manufacturer, chimney installation guide and national legal acts.

*The actual minimum distance to combustible material from the outer surface of a connecting flue pipe must be defined according to the designation of the product, as described in their marking, and national legal acts. If the legal acts and chimney designation indicate different admissible distances to the combustible materials, it is necessary to follow a bigger distance.

The post Wall fixing bracket 3″ for pellet stoves appeared first on Stone & Stoves.

Application
Connecting flue pipes are designed to connect the wood pellet heating appliance outlet and the chimney

Fuel
Wood pellets

Designation code
EN 1856-2 T200-N1-W-V2-L50XXX-G500M
EN 1856-2 T200-P1-W-Vm-L50XXX-O500M

Working temperature

≤ 200 °C

Steel
Painted stainless steel

Wall thickness
0,5 mm

Distance to combustible materials
≥ 500mm*

Certificate no.
1397-CPD-0183

Remark 
Chimney system suitability must
be decided by considering the documentation of the heating appliance manufacturer, chimney installation guide and national legal acts. 

*The actual minimum distance to combustible material from the outer surface of a connecting flue pipe must be defined according to the designation of the product, as described in their marking, and national legal acts. If the legal acts and chimney designation indicate different admissible distances to the combustible materials, it is necessary to follow a bigger distance.

The post 90° tee with drain plug 3″ for pellet stoves appeared first on Stone & Stoves.

Application
Connecting flue pipes are designed to connect the wood pellet heating appliance outlet and the chimney

Fuel
Wood pellets

Designation code
EN 1856-2 T200-N1-W-V2-L50XXX-G500M
EN 1856-2 T200-P1-W-Vm-L50XXX-O500M

Working temperature

≤ 200 °C

Steel
Painted stainless steel

Wall thickness
0,5 mm

Distance to combustible materials
≥ 500mm*

Certificate no.
1397-CPD-0183

Remark 
Chimney system suitability must
be decided by considering the documentation of the heating appliance manufacturer, chimney installation guide and national legal acts. 

*The actual minimum distance to combustible material from the outer surface of a connecting flue pipe must be defined according to the designation of the product, as described in their marking, and national legal acts. If the legal acts and chimney designation indicate different admissible distances to the combustible materials, it is necessary to follow a bigger distance.

The post 90° bend 3″ for pellet stoves appeared first on Stone & Stoves.

Application
Connecting flue pipes are designed to connect the wood pellet heating appliance outlet and the chimney

Fuel
Wood pellets

Designation code
EN 1856-2 T200-N1-W-V2-L50XXX-G500M
EN 1856-2 T200-P1-W-Vm-L50XXX-O500M

Working temperature

≤ 200 °C

Steel
Painted stainless steel

Wall thickness
0,5 mm

Distance to combustible materials
≥ 500mm*

Certificate no.
1397-CPD-0183

Remark 
Chimney system suitability must
be decided by considering the documentation of the heating appliance manufacturer, chimney installation guide and national legal acts. 

*The actual minimum distance to combustible material from the outer surface of a connecting flue pipe must be defined according to the designation of the product, as described in their marking, and national legal acts. If the legal acts and chimney designation indicate different admissible distances to the combustible materials, it is necessary to follow a bigger distance.

The post 45° bend 3″ for pellet stoves appeared first on Stone & Stoves.

Application
Connecting flue pipes are designed to connect the wood pellet heating appliance outlet and the chimney

Fuel
Wood pellets

Designation code
EN 1856-2 T200-N1-W-V2-L50XXX-G500M
EN 1856-2 T200-P1-W-Vm-L50XXX-O500M

Working temperature

≤ 200 °C

Steel
Painted stainless steel

Wall thickness
0,5 mm

Distance to combustible materials
≥ 500mm*

Certificate no.
1397-CPD-0183

Remark 
Chimney system suitability must
be decided by considering the documentation of the heating appliance manufacturer, chimney installation guide and national legal acts. 

*The actual minimum distance to combustible material from the outer surface of a connecting flue pipe must be defined according to the designation of the product, as described in their marking, and national legal acts. If the legal acts and chimney designation indicate different admissible distances to the combustible materials, it is necessary to follow a bigger distance.

The post 500mm pipe 3″ for pellet stoves appeared first on Stone & Stoves.

Application
Connecting flue pipes are designed to connect the wood pellet heating appliance outlet and the chimney

Fuel
Wood pellets

Designation code
EN 1856-2 T200-N1-W-V2-L50XXX-G500M
EN 1856-2 T200-P1-W-Vm-L50XXX-O500M

Working temperature

≤ 200 °C

Steel
Painted stainless steel

Wall thickness
0,5 mm

Distance to combustible materials
≥ 500mm*

Certificate no.
1397-CPD-0183

Remark 
Chimney system suitability must
be decided by considering the documentation of the heating appliance manufacturer, chimney installation guide and national legal acts. 

*The actual minimum distance to combustible material from the outer surface of a connecting flue pipe must be defined according to the designation of the product, as described in their marking, and national legal acts. If the legal acts and chimney designation indicate different admissible distances to the combustible materials, it is necessary to follow a bigger distance.

The post 250mm pipe 3″ for pellet stoves appeared first on Stone & Stoves.

Application
Connecting flue pipes are designed to connect the wood pellet heating appliance outlet and the chimney

Fuel
Wood pellets

Designation code
EN 1856-2 T200-N1-W-V2-L50XXX-G500M
EN 1856-2 T200-P1-W-Vm-L50XXX-O500M

Working temperature

≤ 200 °C

Steel
Painted stainless steel

Wall thickness
0,5 mm

Distance to combustible materials
≥ 500mm*

Certificate no.
1397-CPD-0183

Remark 
Chimney system suitability must
be decided by considering the documentation of the heating appliance manufacturer, chimney installation guide and national legal acts. 

*The actual minimum distance to combustible material from the outer surface of a connecting flue pipe must be defined according to the designation of the product, as described in their marking, and national legal acts. If the legal acts and chimney designation indicate different admissible distances to the combustible materials, it is necessary to follow a bigger distance.

The post 1000mm pipe 3″ for pellet stoves appeared first on Stone & Stoves.

APPLICATION
For use on solid fuel, gas & oil appliances.

CONSTRUCTION
Outer skin is made from 304 grade stainless steel and is 0.5mm thick. The Inner skin is made from 316 grade stainless steel and is 0.5mm thick. Insulation with mineral wool is injected into the chimneys giving a density of 180kg/m³ and is 25 mm thick. All parts are fully welded. Distance to combustibles is 60mm.

APPROVALS
HETAS Approved and is CE marked.
Designation Number
EN1856-1 T600-N1-W-Vm-L50050-G60

The post Adapters/silver appeared first on Stone & Stoves.

• Product Type: Chimney
• Country of origin: Poland
• Type: Flue
• Material: Steel
• Colour: Black
• Manufacturer: Darco

Connections between the elements of the chimney must be sealed with a heat-resistant (1200 [° C] sealant, Made of Steel-type DC01, thickness-2mm-painted “Senotherm” heat-resistant paint

Used in ovens, fireplaces, etc., solid fuel devices to connect to a chimney system, short-term maximum working t-ra 1000’C;
Maximum operating ra-t-600’C;

The post 90° adjustable bend with cleaning door B/F appeared first on Stone & Stoves.