14kw “Kratki” LUCY wood burner tunnel (Display model)

2,015.00 1,387.56 inc. VAT


Top and bottom vents required!

Installation manual

Technical data

Nominal power (kW)14.0
Range of heating power (kW)6.0 – 17.0
Thermal efficiency (%)81.0
Diameter of the pipe (mm)200
Designed for recoveryYes
Fuelallowed lignite briquettes recommended seasoned hardwood
CO (with 13% O 2) given in% ≤0.10
Flue gas temperature (℃)265.0
Max log length (cm)40
The issue of pollen (dust) (mg / Nm 3 )18.0
Compliance BlmSchV 2Yes
Minimum field open outlet grilles (cm 2 )≥900
Minimum field open inlet grilles (cm 2 )≥700
Type of glazingtunnel
Opening the doorto the left
Width (cm)80.40
Height (cm)128.00
Depth (cm)42.00
Intake airYes
The liner of the combustion chamberYes
Decorative glass type glassYes



Efficient combustion and longer maintain temperature by lining the combustion chamber Acumotte, material that accumulates heat, which raises the temperature in the furnace.

Post combustion of fuel particles with two deflector shields that extend way exhaust. This process also increases combustion efficiency and ensure better use of energy, and thus minimizes the emission of harmful substances into the atmosphere.

Air supply to the contribution takes place only from the outside, thanks to the built króćcowi air intake fi 125 mm. His control is done by means of an adjustable throttle one controller beneath the door, which excludes errors improper use. The whole mechanism works very quietly and without failure.

The cartridge is used dopowietrzenia a triple system of the combustion chamber. The primary air for easy lighting wood is supplied under the grate. The secondary air – ensuring economic and ecological burning – is supplied holes in the back wall.

In addition, in the cartridge system is used pure glass (air curtain), which air is supplied directly to the glass through a system of channels located on the sides of the fireplace. In this way oxygen is supplied to the upper part of the combustion chamber, in which the post-combustion of gases produced by the combustion of wood, which further reduces the harmful to the atmosphere.

The use of such a system dopowietrzenia allows very precise control of the combustion process.



Front cartridge provided with a ceramic refractory to withstand temperatures up to 800 ° C. We offered by us glass certified quality and safety.

The body and the front of the cartridge resistant to high temperatures through the use of high quality steel.

Excellent tightness, thanks to the solid spawom made shielded noble gas. Steel elements laser cut with the help of modern equipment, and bent on CNC benders.



The fireplace uses specially profiled bottom plate made of Acumotte, so that the combustion chamber is deeper and accommodates a larger amount of wood.

Removable grate and ash facilitate maintenance cartridge clean.

Limited soot deposition occurs especially effective, pure glass. The air curtain separates the glass from the furnace. So it does not get dirty and gives the room more heat.

Ability to compensate for uneven ground and leveled thanks to the contribution of regulated the legs.

The model is equipped with a movable exhaust outlet, so that in case of installation, there is no need to purchase additional knee. You can easily adjust the angle connecting the cartridge to the chimney system.



The contribution is equipped with two front and rear doors (instead of the rear wall), so heat radiates in two directions.

This type of fireplace is often the chosen solution for mounting between adjacent spaces, eg. A living room and dining room and bedroom.

The contribution is equipped with a single, decorative glass type of glass, through which looks elegant and modern. This solution increases the optical front input and emphasizes the vision of fire.

Doors contribution has a comfortable handle.

5 year warranty.


Technical drawing