* Kit Wi-Fi €315
* GSM, allows for switching the stove on/off via mobile phone €305
* Cable for GSM telephone switch €30
* Antenna KIT (for use in areas with low signal strength) €70
* Anti-condensation valve €175
* KIT A2 €1015
For pellet thermo stove installation.
Consisting of: 30-plate heat exchanger, system circulator, check valve, 2 relief valves, safety valve, remote display for temperature control.
With ceramic sides, top and inserts color opaque white, salt and pepper, bordeaux or dark grey.
Produces hot air (can be deactivated) to heat the room where it is installed.• Innovative technology: The Leonardo System detects the main parameters of combustion (type of pellet, atmospheric conditions, chimney flue conditions) to guarantee optimal operation.
• Cast iron and steel combustion chamber.
• Kit with built-in circulating pump, expansion vessel and safety valve
• Remote control with display
|
OPERATING PRINCIPLE AND GENERAL SPECIFICATIONS
The devices are designed to produce hot water by automatically burning wood pellets.All phases are controlled by the electronic controller’s software, which guarantee’s high efficiency and low emissions in total safety.
The hot water is conveyed to the radiators (high temperature) or in-floor radiator panels (low temperature) throughout the house.
The boiler stoves can be integrated into hybrid systems with solar panels, wall-mounted boilers and accumulators, etc., to create advanced heating solutions.
Special kits are available to allow them to produce domestic hot water for the bathroom and kitchen, which can be stored in boilers so as always to be available at the desired temperature.
Pellet boiler stoves can also be connected to the existing heating system, whether with closed or open expansion vessel.
A wide range of kits area available for every installation requirement.
GENERAL OPERATIONAL SCHEME
For the scheme specific to your model, refer to the technical data sheet enclosed with the product.
1 = pellet hopper with top loading hatch
2 = screw for conveying the pellets from the hopper to the combustion chamber
3 = screw gearmotor
4 = pellet combustion hearth
5 = electric heating element for igniting the pellet
6 = centrifugal fan for extracting the combustion fumes
7 = ront grille for delivering the hot air to the room, if so desired
8 = synoptic panel for controlling/monitoring the device’s operation
9 = combustion air port for connection to external intake
10 = fumes outlet port for connection to flue
11 = tube coils for circulating and heating the water
12 = water delivery to heating system
13 = water return from heating system
14 = closed expansion vessel
