15kw “Kratki” MBO wood burner insert (Display model) in Mullingar

1,828.77 885.00 inc. VAT

Top and bottom vents required!
Installation manual

Additional options:
External air supply kit  – price €100

Technical data

Nominal power (kW)15.0
Range of heating power (kW)7.0 – 19.0
Thermal efficiency (%)83.0
Exhaust outlet diameter (mm)200
Meets the ECODESIGN criteriaYes
Intended for recuperationYes
Fuel typerecommended seasoned hardwood with humidity ≤20%
Weight (kg)214.0
CO emissions (at 13% O 2) ≤ given in%0.09
Flue gas temperature (℃)240.0
Max log length (cm)50
Pollen emissions (dust) (mg / Nm 3 )30.0
Compliance with BImSchV 2 standardYes
The energy efficiencyindexEEI109.30
The minimum active field of outlet grilles (cm 2 )≥900
The minimum active field of inlet grilles (cm 2 )≥700
The type of glazing issimple
Opening the doorto the left
Material made ofsteel
Width (cm)83.00
Height (cm)144.00
Depth (cm)47.30
Air intakeYes
Combustion chamber liningYes
Decorative glass typeYes



The body and front made of high quality steel resistant to very high temperatures.

Effective combustion and longer temperature maintenance thanks to the lining of the combustion chamber TERMOTEC – a heat accumulating material that increases the temperature in the chamber.

A high flue and transversely placed flame tubes – increase the heat exchange surface between the insert and the environment. Lowering the flue gas temperature helps to increase the efficiency of the device.

Stable and resistant to stress fireplace door made of a closed profile. The door seal is located in a profiled channel, which guarantees its proper adhesion and prevents it from falling out during operation.

Combustion of fuel particles thanks to a deflector that extends the exhaust path.

Air supply only from the outside thanks to the built-in air intake fi 125 mm. Adjusting the air intake with a single regulator, which excludes errors in misuse.

Triple combustion chamber ventilation system: primary air – directed to the plate on which the combustion takes place; secondary air is supplied through the holes in the rear wall. In addition, the insert uses a clean glass system (air curtain).


Excellent tightness thanks to solid welds made in a noble gas shield.

Steel elements are laser cut using modern equipment and then bent on CNC bending machines.

The front of the insert is equipped with heat-resistant ceramics that withstands temperatures up to 660 ° C.


The device meets the Ecodesign requirements and the BImSchV 2 standard determining the maximum CO emission.


Grate-free insert – afterburning on ash, which means that the fuel burns to fine ash, which remains the minimum amount. The thermal energy obtained from wood is maximally utilized.

The bottom plate of the insert is significantly lowered in relation to the door.

Reduction of soot due to the clean windshield system (air deflector).

The special perforated handle design protects against excessive heating, which affects the high comfort of using the fireplace.


Fireplace insert with two glass panes arranged at right angles (combined glass without sash).

Decorative glass pane withstands temperatures up to 660 ° C, which gives the fireplace a modern and elegant look, optically enlarges the front of the insert.

The insert door has a modern door handle.

Technical drawing

Additional Information
Weight 200 kg