Black Twin Wall Flues | Order Online| Stone & Stoves https://stoneandstoves.ie/product-category/flues/twin-wall-flues-black/ Stone & Stoves Thu, 16 Oct 2025 13:49:51 +0000 en-US hourly 1 https://wordpress.org/?v=7.1.4 https://stoneandstoves.ie/wp-content/uploads/2023/11/cropped-Screenshot-2023-11-08-at-15.43.25-32x32.png Black Twin Wall Flues | Order Online| Stone & Stoves https://stoneandstoves.ie/product-category/flues/twin-wall-flues-black/ 32 32 Flashing (for flat roofs) https://stoneandstoves.ie/product/flashing-for-tiled-or-slate-roofs/ Tue, 03 Jun 2025 11:55:28 +0000 https://stoneandstoves.ie/?post_type=product&p=17080 High Temp Grey SILICONE AI-Flash – No 8 Metal Grey SILICONE 178-330mm 435×435 APPLICATION Suitable for profiled sheeting and flat panel surfaces and is temperature resistance -74°C to 260°C CONSTRUCTION Enviromentally safe lead free aluminium base. The SILICONE rubber upstand has a 20 year life. The built in 20° pitch allows adaptability to almost any [...]

The post Flashing (for flat roofs) appeared first on Stone & Stoves.

]]>
High Temp Grey SILICONE

AI-Flash – No 8 Metal Grey SILICONE 178-330mm 435×435

APPLICATION
Suitable for profiled sheeting and flat panel surfaces and is temperature resistance -74°C to 260°C

CONSTRUCTION
Enviromentally safe lead free aluminium base. The SILICONE rubber upstand has a 20 year life. The built in 20° pitch allows adaptability to almost any roof pitch including 45°. The pull tab design and easy smooth tear grooving is intended to eliminate cutting by knife and allow for a circular hole.

INSTALLATION
1. Pull tab design to correct size using pliers, alternatively cut using a stanley knife.
2.Apply silicone sealant to back of flashing.
3.Remove tiles around pipe and slide flashing over pipe.
4. Fasten Flashing to the roof.
5. Cut tile to fit to the top of the Flashing allowing the bottom of the flashing metal base to sit on top of the tiles.

The post Flashing (for flat roofs) appeared first on Stone & Stoves.

]]> Spark catch deflector/black https://stoneandstoves.ie/product/spark-catch-deflector-black/ Tue, 08 Apr 2025 11:45:04 +0000 https://stoneandstoves.ie/?post_type=product&p=16814 The post Spark catch deflector/black appeared first on Stone & Stoves.

]]>

3″(80mm) twin wall flue: 3″(80mm) inside diameter

5″(130mm) twin wall flue: 5″(130mm) inside diameter

6″(150mm) twin wall flue: 6″(150mm) inside diameter

APPLICATION
Suitable for systems using gas, liquid (except for those with sulfur content >= 0.2% by mass) or solid (except coal and peat) fuels.

APPROVALS
HETAS Approved and is CE marked.
Designation Number
EN1856-1 T600-N1-W-Vm-L50050-G60

The system of chimney liners is designed to remove combustion products from heating devices by natural draft.
Operating temperature <= 600 °C.
Made of stainless steel EN 1.4304
The system is resistant to soot ignition, suitable for operation in dry conditions.

The post Spark catch deflector/black appeared first on Stone & Stoves.

]]> 45° rosette/black https://stoneandstoves.ie/product/45-rosetteblack/ Fri, 22 Jan 2016 17:10:18 +0000 https://stoneandstoves.ie/shop/flues/45-rosetteblack/ 3″(80mm) twin wall flue: 3″(80mm) inside diameter, 5″(130mm) outside diameter (FOR PELLET STOVES ONLY) 5″(130mm) twin wall flue: 5″(130mm) inside diameter, 7″(180mm) outside diameter 6″(150mm) twin wall flue: 6″(150mm) inside diameter, 8″(200mm) outside diameter Item: 45° rosette – BLACK Designation: EN1856-1 T600-N1-W-Vm-L50050-G60 Inner Material: 316 Stainless Steel – 0.50mm thick Outer Material: 304 Stainless Steel – 0.50mm [...]

The post 45° rosette/black appeared first on Stone & Stoves.

]]> 3″(80mm) twin wall flue: 3″(80mm) inside diameter, 5″(130mm) outside diameter (FOR PELLET STOVES ONLY)

5″(130mm) twin wall flue: 5″(130mm) inside diameter, 7″(180mm) outside diameter

6″(150mm) twin wall flue: 6″(150mm) inside diameter, 8″(200mm) outside diameter

Item: 45° rosette – BLACK
Designation: EN1856-1 T600-N1-W-Vm-L50050-G60
Inner Material: 316 Stainless Steel – 0.50mm thick
Outer Material: 304 Stainless Steel – 0.50mm thick
Fuels: Wood, Oil, Gas, Low sulpher coal
Approvals: HETAS / CE
Distance to Combustibles: 60mm

APPLICATION
For use on solid fuel, gas & oil appliances.

CONSTRUCTION
Outer skin is made from 304 grade stainless steel and is 0.5mm thick, then powder coated in a high temperature black finish paint. The Inner skin is made from 316 grade stainless steel and is 0.5mm thick. Insulation with mineral wool is injected into the chimneys giving a density of 180kg/m3 and is 25 mm thick. All parts are fully welded. Distance to combustibles is 60mm.

APPROVALS
HETAS Approved and is CE marked.
Designation Number
EN1856-1 T600-N1-W-Vm-L50050-G60

INSTALLATION
Use silicone to secure against the wall.

The post 45° rosette/black appeared first on Stone & Stoves.

]]> Rain cap/black https://stoneandstoves.ie/product/rain-cap-copy/ Fri, 30 Jan 2015 12:46:01 +0000 https://stoneandstoves.ie/shop/black-twin-wall-flues/rain-cap-copy/ 5″(130mm) twin wall flue: 5″(130mm) inside diameter, 7″(180mm) outside diameter 6″(150mm) twin wall flue: 6″(150mm) inside diameter, 8″(200mm) outside diameter Item: Rain cap – BLACK Designation: EN1856-1 T600-N1-W-Vm-L50050-G60 Inner Material: 316 Stainless Steel – 0.50mm thick Outer Material: 304 Stainless Steel – 0.50mm thick Fuels: Wood, Oil, Gas, Low sulpher coal Approvals: HETAS / CE Distance [...]

The post Rain cap/black appeared first on Stone & Stoves.

]]> 5″(130mm) twin wall flue: 5″(130mm) inside diameter, 7″(180mm) outside diameter

6″(150mm) twin wall flue: 6″(150mm) inside diameter, 8″(200mm) outside diameter

Item: Rain cap – BLACK
Designation: EN1856-1 T600-N1-W-Vm-L50050-G60
Inner Material: 316 Stainless Steel – 0.50mm thick
Outer Material: 304 Stainless Steel – 0.50mm thick
Fuels: Wood, Oil, Gas, Low sulpher coal
Approvals: HETAS / CE
Distance to Combustibles: 60mm

APPLICATION
For use on solid fuel, gas & oil appliances.

CONSTRUCTION
Outer skin is made from 304 grade stainless steel and is 0.5mm thick, then powder coated in a high temperature black finish paint. The Inner skin is made from 316 grade stainless steel and is 0.5mm thick. Insulation with mineral wool is injected into the chimneys giving a density of 180kg/m3 and is 25 mm thick. All parts are fully welded. Distance to combustibles is 60mm.

APPROVALS
HETAS Approved and is CE marked.
Designation Number
EN1856-1 T600-N1-W-Vm-L50050-G60

 

 

The post Rain cap/black appeared first on Stone & Stoves.

]]> Wall bracket/black https://stoneandstoves.ie/product/wall-bracket-2/ Fri, 30 Jan 2015 12:45:28 +0000 https://stoneandstoves.ie/shop/black-twin-wall-flues/wall-bracket-2/ 3″(80mm) twin wall flue: 3″(80mm) inside diameter, 5″(130mm) outside diameter (FOR PELLET STOVES ONLY) 5″(130mm) twin wall flue: 5″(130mm) inside diameter, 7″(180mm) outside diameter 6″(150mm) twin wall flue: 6″(150mm) inside diameter, 8″(200mm) outside diameter Item: Wall bracket – BLACK Designation: EN1856-1 T600-N1-W-Vm-L50050-G60 Inner Material: 316 Stainless Steel – 0.50mm thick Outer Material: 304 Stainless Steel – 0.50mm [...]

The post Wall bracket/black appeared first on Stone & Stoves.

]]> 3″(80mm) twin wall flue: 3″(80mm) inside diameter, 5″(130mm) outside diameter (FOR PELLET STOVES ONLY)

5″(130mm) twin wall flue: 5″(130mm) inside diameter, 7″(180mm) outside diameter

6″(150mm) twin wall flue: 6″(150mm) inside diameter, 8″(200mm) outside diameter

Item: Wall bracket – BLACK
Designation: EN1856-1 T600-N1-W-Vm-L50050-G60
Inner Material: 316 Stainless Steel – 0.50mm thick
Outer Material: 304 Stainless Steel – 0.50mm thick
Fuels: Wood, Oil, Gas, Low sulpher coal
Approvals: HETAS / CE
Distance to Combustibles: 60mm

APPLICATION
For use on solid fuel, gas & oil appliances.

CONSTRUCTION
Outer skin is made from 304 grade stainless steel and is 0.5mm thick, then powder coated in a high temperature black finish paint. The Inner skin is made from 316 grade stainless steel and is 0.5mm thick. Insulation with mineral wool is injected into the chimneys giving a density of 180kg/m3 and is 25 mm thick. All parts are fully welded. Distance to combustibles is 60mm.

APPROVALS
HETAS Approved and is CE marked.
Designation Number
EN1856-1 T600-N1-W-Vm-L50050-G60

 

 

The post Wall bracket/black appeared first on Stone & Stoves.

]]> Adjustable wall bracket/black https://stoneandstoves.ie/product/adjustable-wall-bracket-2/ Fri, 30 Jan 2015 12:45:16 +0000 https://stoneandstoves.ie/shop/black-twin-wall-flues/adjustable-wall-bracket-2/ 3″(80mm) twin wall flue: 3″(80mm) inside diameter, 5″(130mm) outside diameter (FOR PELLET STOVES ONLY) 5″(130mm) twin wall flue: 5″(130mm) inside diameter, 7″(180mm) outside diameter 6″(150mm) twin wall flue: 6″(150mm) inside diameter, 8″(200mm) outside diameter Item: Adjustable wall bracket – BLACK Designation: EN1856-1 T600-N1-W-Vm-L50050-G60 Inner Material: 316 Stainless Steel – 0.50mm thick Outer Material: 304 Stainless Steel – [...]

The post Adjustable wall bracket/black appeared first on Stone & Stoves.

]]> 3″(80mm) twin wall flue: 3″(80mm) inside diameter, 5″(130mm) outside diameter (FOR PELLET STOVES ONLY)

5″(130mm) twin wall flue: 5″(130mm) inside diameter, 7″(180mm) outside diameter

6″(150mm) twin wall flue: 6″(150mm) inside diameter, 8″(200mm) outside diameter

Item: Adjustable wall bracket – BLACK
Designation: EN1856-1 T600-N1-W-Vm-L50050-G60
Inner Material: 316 Stainless Steel – 0.50mm thick
Outer Material: 304 Stainless Steel – 0.50mm thick
Fuels: Wood, Oil, Gas, Low sulpher coal
Approvals: HETAS / CE
Distance to Combustibles: 60mm

APPLICATION
For use on solid fuel, gas & oil appliances.

CONSTRUCTION
Outer skin is made from 304 grade stainless steel and is 0.5mm thick, then powder coated in a high temperature black finish paint. The Inner skin is made from 316 grade stainless steel and is 0.5mm thick. Insulation with mineral wool is injected into the chimneys giving a density of 180kg/m3 and is 25 mm thick. All parts are fully welded. Distance to combustibles is 60mm.

APPROVALS
HETAS Approved and is CE marked.
Designation Number
EN1856-1 T600-N1-W-Vm-L50050-G60

 

The post Adjustable wall bracket/black appeared first on Stone & Stoves.

]]> Bottom cover/black (Single wall to twin wall adapter) https://stoneandstoves.ie/product/bottom-cover-2/ Fri, 30 Jan 2015 14:44:40 +0000 https://stoneandstoves.ie/shop/black-twin-wall-flues/bottom-cover-2/ CLAMP INCLUDED! 3″(80mm) twin wall flue: 3″(80mm) inside diameter, 5″(130mm) outside diameter (FOR PELLET STOVES ONLY) 5″(130mm) twin wall flue: 5″(130mm) inside diameter, 7″(180mm) outside diameter 6″(150mm) twin wall flue: 6″(150mm) inside diameter, 8″(200mm) outside diameter Item: Bottom cover- BLACK (Single wall to twin wall adapter) Designation: EN1856-1 T600-N1-W-Vm-L50050-G60 Inner Material: 316 Stainless Steel – [...]

The post Bottom cover/black (Single wall to twin wall adapter) appeared first on Stone & Stoves.

]]> CLAMP INCLUDED!

3″(80mm) twin wall flue: 3″(80mm) inside diameter, 5″(130mm) outside diameter (FOR PELLET STOVES ONLY)

5″(130mm) twin wall flue: 5″(130mm) inside diameter, 7″(180mm) outside diameter

6″(150mm) twin wall flue: 6″(150mm) inside diameter, 8″(200mm) outside diameter

Item: Bottom cover- BLACK (Single wall to twin wall adapter)
Designation: EN1856-1 T600-N1-W-Vm-L50050-G60
Inner Material: 316 Stainless Steel – 0.50mm thick
Outer Material: 304 Stainless Steel – 0.50mm thick
Fuels: Wood, Oil, Gas, Low sulpher coal
Approvals: HETAS / CE
Distance to Combustibles: 60mm

APPLICATION
For use on solid fuel, gas & oil appliances.

CONSTRUCTION
Outer skin is made from 304 grade stainless steel and is 0.5mm thick, then powder coated in a high temperature black finish paint. The Inner skin is made from 316 grade stainless steel and is 0.5mm thick. Insulation with mineral wool is injected into the chimneys giving a density of 180kg/m3 and is 25 mm thick. All parts are fully welded. Distance to combustibles is 60mm.

APPROVALS
HETAS Approved and is CE marked.
Designation Number
EN1856-1 T600-N1-W-Vm-L50050-G60

INSTALLATION
This adaptor is used to connect from single wall flue to twin wall insulated flue, when fitting you should make joint with a fire cement.
Twin Wall flue parts are secured together by using a clamp (supplied).
Make sure that you keep a distance of 60mm from the outside of the flue to any combustible material (wood, plaster board).

The post Bottom cover/black (Single wall to twin wall adapter) appeared first on Stone & Stoves.

]]> Top cover/black (Cowl adapter) https://stoneandstoves.ie/product/top-cover-2/ Fri, 30 Jan 2015 14:44:30 +0000 https://stoneandstoves.ie/shop/black-twin-wall-flues/top-cover-2/ CLAMP INCLUDED 3″(80mm) twin wall flue: 3″(80mm) inside diameter, 5″(130mm) outside diameter (FOR PELLET STOVES ONLY) 5″(130mm) twin wall flue: 5″(130mm) inside diameter, 7″(180mm) outside diameter 6″(150mm) twin wall flue: 6″(150mm) inside diameter, 8″(200mm) outside diameter Item: Bottom cover – BLACK (Adapter from twin wall to single wall) Designation: EN1856-1 T600-N1-W-Vm-L50050-G60 Inner Material: 316 Stainless Steel [...]

The post Top cover/black (Cowl adapter) appeared first on Stone & Stoves.

]]> CLAMP INCLUDED

3″(80mm) twin wall flue: 3″(80mm) inside diameter, 5″(130mm) outside diameter (FOR PELLET STOVES ONLY)

5″(130mm) twin wall flue: 5″(130mm) inside diameter, 7″(180mm) outside diameter

6″(150mm) twin wall flue: 6″(150mm) inside diameter, 8″(200mm) outside diameter

Item: Bottom cover – BLACK (Adapter from twin wall to single wall)
Designation: EN1856-1 T600-N1-W-Vm-L50050-G60
Inner Material: 316 Stainless Steel – 0.50mm thick
Outer Material: 304 Stainless Steel – 0.50mm thick
Fuels: Wood, Oil, Gas, Low sulpher coal
Approvals: HETAS / CE
Distance to Combustibles: 60mm

APPLICATION
For use on solid fuel, gas & oil appliances.

CONSTRUCTION
Outer skin is made from 304 grade stainless steel and is 0.5mm thick, then powder coated in a high temperature black finish paint. The Inner skin is made from 316 grade stainless steel and is 0.5mm thick. Insulation with mineral wool is injected into the chimneys giving a density of 180kg/m3 and is 25 mm thick. All parts are fully welded. Distance to combustibles is 60mm.

APPROVALS
HETAS Approved and is CE marked.
Designation Number
EN1856-1 T600-N1-W-Vm-L50050-G60

INSTALLATION
This adaptor is used to connect  a rain cap at the top of the chimney. Twin Wall flue parts are secured together by using a clamp (supplied).
Make sure that you keep a distance of 60mm from the outside of the flue to any combustible material (wood, plaster board).

The post Top cover/black (Cowl adapter) appeared first on Stone & Stoves.

]]> Twin wall flue 250mm/black https://stoneandstoves.ie/product/double-wall-chimney-250mm-2/ Fri, 30 Jan 2015 12:44:04 +0000 https://stoneandstoves.ie/shop/black-twin-wall-flues/double-wall-chimney-250mm-2/ CLAMP INCLUDED 3″(80mm) twin wall flue: 3″(80mm) inside diameter, 5″(130mm) outside diameter (FOR PELLET STOVES ONLY) 5″(130mm) twin wall flue: 5″(130mm) inside diameter, 7″(180mm) outside diameter 6″(150mm) twin wall flue: 6″(150mm) inside diameter, 8″(200mm) outside diameter Item: Double wall chimney 250mm – BLACK  Designation: EN1856-1 T600-N1-W-Vm-L50050-G60 Inner Material: 316 Stainless Steel – 0.50mm thick Outer [...]

The post Twin wall flue 250mm/black appeared first on Stone & Stoves.

]]> CLAMP INCLUDED

3″(80mm) twin wall flue: 3″(80mm) inside diameter, 5″(130mm) outside diameter (FOR PELLET STOVES ONLY)

5″(130mm) twin wall flue: 5″(130mm) inside diameter, 7″(180mm) outside diameter

6″(150mm) twin wall flue: 6″(150mm) inside diameter, 8″(200mm) outside diameter

Item: Double wall chimney 250mm – BLACK 
Designation: EN1856-1 T600-N1-W-Vm-L50050-G60
Inner Material: 316 Stainless Steel – 0.50mm thick
Outer Material: 304 Stainless Steel – 0.50mm thick
Fuels: Wood, Oil, Gas, Low sulpher coal
Approvals: HETAS / CE
Distance to Combustibles: 60mm

APPLICATION
For use on solid fuel, gas & oil appliances.

CONSTRUCTION
Outer skin is made from 304 grade stainless steel and is 0.5mm thick, then powder coated in a high temperature black finish paint. The Inner skin is made from 316 grade stainless steel and is 0.5mm thick. Insulation with mineral wool is injected into the chimneys giving a density of 180kg/m3 and is 25 mm thick. All parts are fully welded. Distance to combustibles is 60mm.

APPROVALS
HETAS Approved and is CE marked.
Designation Number
EN1856-1 T600-N1-W-Vm-L50050-G60

INSTALLATION
Twin Wall flue parts are secured together by using a clamp (supplied).
Make sure that you keep a distance of 60mm from the outside of the flue to any combustible material (wood, plaster board).

 

 

The post Twin wall flue 250mm/black appeared first on Stone & Stoves.

]]> Twin wall flue 500mm/black https://stoneandstoves.ie/product/double-wall-chimney-500mm-2/ Fri, 30 Jan 2015 12:43:52 +0000 https://stoneandstoves.ie/shop/black-twin-wall-flues/double-wall-chimney-500mm-2/ 3″(80mm) twin wall flue: 3″(80mm) inside diameter, 5″(130mm) outside diameter (FOR PELLET STOVES ONLY) 5″(130mm) twin wall flue: 5″(130mm) inside diameter, 7″(180mm) outside diameter 6″(150mm) twin wall flue: 6″(150mm) inside diameter, 8″(200mm) outside diameter Item: Double wall chimney 500mm – BLACK Designation: EN1856-1 T600-N1-W-Vm-L50050-G60 Inner Material: 316 Stainless Steel – 0.50mm thick Outer Material: 304 Stainless [...]

The post Twin wall flue 500mm/black appeared first on Stone & Stoves.

]]> 3″(80mm) twin wall flue: 3″(80mm) inside diameter, 5″(130mm) outside diameter (FOR PELLET STOVES ONLY)

5″(130mm) twin wall flue: 5″(130mm) inside diameter, 7″(180mm) outside diameter

6″(150mm) twin wall flue: 6″(150mm) inside diameter, 8″(200mm) outside diameter

Item: Double wall chimney 500mm – BLACK
Designation: EN1856-1 T600-N1-W-Vm-L50050-G60
Inner Material: 316 Stainless Steel – 0.50mm thick
Outer Material: 304 Stainless Steel – 0.50mm thick
Fuels: Wood, Oil, Gas, Low sulpher coal
Approvals: HETAS / CE
Distance to Combustibles: 60mm

APPLICATION
For use on solid fuel, gas & oil appliances.

CONSTRUCTION
Outer skin is made from 304 grade stainless steel and is 0.5mm thick, then powder coated in a high temperature black finish paint. The Inner skin is made from 316 grade stainless steel and is 0.5mm thick. Insulation with mineral wool is injected into the chimneys giving a density of 180kg/m3 and is 25 mm thick. All parts are fully welded. Distance to combustibles is 60mm.

APPROVALS
HETAS Approved and is CE marked.
Designation Number
EN1856-1 T600-N1-W-Vm-L50050-G60

INSTALLATION
Twin Wall flue parts are secured together by using a clamp (supplied).
Make sure that you keep a distance of 60mm from the outside of the flue to any combustible material (wood, plaster board).

The post Twin wall flue 500mm/black appeared first on Stone & Stoves.

]]>