CLAMP INCLUDED
3″(80mm) twin wall flue: 3″(80mm) inside diameter, 5″(130mm) outside diameter (FOR PELLET STOVES ONLY)
5″(130mm) twin wall flue: 5″(130mm) inside diameter, 7″(180mm) outside diameter
6″(150mm) twin wall flue: 6″(150mm) inside diameter, 8″(200mm) outside diameter
Item: | Bottom cover – BLACK (Adapter from twin wall to single wall) |
Designation: | EN1856-1 T600-N1-W-Vm-L50050-G60 |
Inner Material: | 316 Stainless Steel – 0.50mm thick |
Outer Material: | 304 Stainless Steel – 0.50mm thick |
Fuels: | Wood, Oil, Gas, Low sulpher coal |
Approvals: | HETAS / CE |
Distance to Combustibles: | 60mm |
APPLICATION
For use on solid fuel, gas & oil appliances.
CONSTRUCTION
Outer skin is made from 304 grade stainless steel and is 0.5mm thick, then powder coated in a high temperature black finish paint. The Inner skin is made from 316 grade stainless steel and is 0.5mm thick. Insulation with mineral wool is injected into the chimneys giving a density of 180kg/m3 and is 25 mm thick. All parts are fully welded. Distance to combustibles is 60mm.
APPROVALS
HETAS Approved and is CE marked.
Designation Number
EN1856-1 T600-N1-W-Vm-L50050-G60
INSTALLATION
This adaptor is used to connect a rain cap at the top of the chimney. Twin Wall flue parts are secured together by using a clamp (supplied).
Make sure that you keep a distance of 60mm from the outside of the flue to any combustible material (wood, plaster board).