Twin wall flues SILVER | Stone & Stoves https://stoneandstoves.ie/product-category/flues/twin-wall-flues-silver/ Stone & Stoves Mon, 21 Sep 2026 09:49:55 +0000 en-US hourly 1 https://wordpress.org/?v=7.1.4 https://stoneandstoves.ie/wp-content/uploads/2023/11/cropped-Screenshot-2023-11-08-at-15.43.25-32x32.png Twin wall flues SILVER | Stone & Stoves https://stoneandstoves.ie/product-category/flues/twin-wall-flues-silver/ 32 32 Flashing (for flat roofs) https://stoneandstoves.ie/product/flashing-for-tiled-or-slate-roofs/ Tue, 03 Jun 2025 11:55:28 +0000 https://stoneandstoves.ie/?post_type=product&p=17080 High Temp Grey SILICONE AI-Flash – No 8 Metal Grey SILICONE 178-330mm 435×435 APPLICATION Suitable for profiled sheeting and flat panel surfaces and is temperature resistance -74°C to 260°C CONSTRUCTION Enviromentally safe lead free aluminium base. The SILICONE rubber upstand has a 20 year life. The built in 20° pitch allows adaptability to almost any [...]

The post Flashing (for flat roofs) appeared first on Stone & Stoves.

]]>
High Temp Grey SILICONE

AI-Flash – No 8 Metal Grey SILICONE 178-330mm 435×435

APPLICATION
Suitable for profiled sheeting and flat panel surfaces and is temperature resistance -74°C to 260°C

CONSTRUCTION
Enviromentally safe lead free aluminium base. The SILICONE rubber upstand has a 20 year life. The built in 20° pitch allows adaptability to almost any roof pitch including 45°. The pull tab design and easy smooth tear grooving is intended to eliminate cutting by knife and allow for a circular hole.

INSTALLATION
1. Pull tab design to correct size using pliers, alternatively cut using a stanley knife.
2.Apply silicone sealant to back of flashing.
3.Remove tiles around pipe and slide flashing over pipe.
4. Fasten Flashing to the roof.
5. Cut tile to fit to the top of the Flashing allowing the bottom of the flashing metal base to sit on top of the tiles.

The post Flashing (for flat roofs) appeared first on Stone & Stoves.

]]> Spark catch deflector https://stoneandstoves.ie/product/spark-catch-deflector/ Fri, 26 Jan 2024 13:41:59 +0000 https://stoneandstoves.ie/?post_type=product&p=15546 The post Spark catch deflector appeared first on Stone & Stoves.

]]>

5″(130mm) twin wall flue: 5″(130mm) inside diameter

6″(150mm) twin wall flue: 6″(150mm) inside diameter

8″ (200mm) twin wall flue: 8″(200mm) inside diameter

APPLICATION
Suitable for systems using gas, liquid (except for those with sulfur content >= 0.2% by mass) or solid (except coal and peat) fuels.

APPROVALS
HETAS Approved and is CE marked.
Designation Number
EN1856-1 T600-N1-W-Vm-L50050-G60

The system of chimney liners is designed to remove combustion products from heating devices by natural draft.
Operating temperature <= 600 °C.
Made of stainless steel EN 1.4304
The system is resistant to soot ignition, suitable for operation in dry conditions.

The post Spark catch deflector appeared first on Stone & Stoves.

]]> Storm collar (For roof flashing) https://stoneandstoves.ie/product/storm-collar-for-roof-flashing/ Sat, 04 Apr 2020 09:56:50 +0000 https://stoneandstoves.ie/product/storm-collar-for-roof-flashing/ 5″(130mm) twin wall flue: 5″(130mm) inside diameter, 7″(180mm) outside diameter 6″(150mm) twin wall flue: 6″(150mm) inside diameter, 8″(200mm) outside diameter 8″(200mm) twin wall flue: 8″(200mm) inside diameter, 10″(250mm) outside diameter Item: Storm collar  Designation: EN1856-1 T600-N1-W-Vm-L50050-G60 Inner Material: 316 Stainless Steel – 0.50mm thick Outer Material: 304 Stainless Steel – 0.50mm thick Fuels: Wood, Oil, Gas, [...]

The post Storm collar (For roof flashing) appeared first on Stone & Stoves.

]]> 5″(130mm) twin wall flue: 5″(130mm) inside diameter, 7″(180mm) outside diameter

6″(150mm) twin wall flue: 6″(150mm) inside diameter, 8″(200mm) outside diameter

8″(200mm) twin wall flue: 8″(200mm) inside diameter, 10″(250mm) outside diameter

Item: Storm collar 
Designation: EN1856-1 T600-N1-W-Vm-L50050-G60
Inner Material: 316 Stainless Steel – 0.50mm thick
Outer Material: 304 Stainless Steel – 0.50mm thick
Fuels: Wood, Oil, Gas, Low sulpher coal
Approvals: HETAS / CE
Distance to Combustibles: 60mm

APPLICATION
For use on solid fuel, gas & oil appliances.

APPROVALS
HETAS Approved and is CE marked.
Designation Number
EN1856-1 T600-N1-W-Vm-L50050-G60

INSTALLATION
It should be installed about 25mm above the tallest part of the flashing. Once secure run a bead of silicone around the top edge and the flue to complete the water-tightness.

The post Storm collar (For roof flashing) appeared first on Stone & Stoves.

]]> Bottom cover for 125mm (Enamel to twin wall adapter) https://stoneandstoves.ie/product/125mm-to-130mm-increaser-enamel-to-twin-wall-adapter/ Sat, 04 Apr 2020 09:25:07 +0000 https://stoneandstoves.ie/product/125mm-to-130mm-increaser-enamel-to-twin-wall-adapter/ Item: Bottom cover (Adapter from single wall to twin wall flues) Designation: EN1856-1 T600-N1-W-Vm-L50050-G60 Inner Material: 316 Stainless Steel – 0.50mm thick Outer Material: 304 Stainless Steel – 0.50mm thick Fuels: Wood, Oil, Gas, Low sulpher coal Approvals: HETAS / CE Distance to Combustibles: 60mm APPLICATION For use on solid fuel, gas & oil appliances. CONSTRUCTION Outer [...]

The post Bottom cover for 125mm (Enamel to twin wall adapter) appeared first on Stone & Stoves.

]]>
Item: Bottom cover (Adapter from single wall to twin wall flues)
Designation: EN1856-1 T600-N1-W-Vm-L50050-G60
Inner Material: 316 Stainless Steel – 0.50mm thick
Outer Material: 304 Stainless Steel – 0.50mm thick
Fuels: Wood, Oil, Gas, Low sulpher coal
Approvals: HETAS / CE
Distance to Combustibles: 60mm

APPLICATION
For use on solid fuel, gas & oil appliances.

CONSTRUCTION
Outer skin is made from 304 grade stainless steel and is 0.5mm thick. The Inner skin is made from 316 grade stainless steel and is 0.5mm thick. Insulation with mineral wool is injected into the chimneys giving a density of 180kg/m3 and is 25 mm thick. All parts are fully welded. Distance to combustibles is 60mm.

APPROVALS
HETAS Approved and is CE marked.
Designation Number
EN1856-1 T600-N1-W-Vm-L50050-G60

INSTALLATION
This adaptor is used to connect from Vitreous enamel (125mm) wall flue into twin wall insulated flue (130mm), when fitting you should make joint with fire cement.
Twin Wall Insulated Chimney parts are secured together by using a clamp.
Make sure that you keep a distance of 60mm from the outside of the flue to any combustible material (wood, plaster board). 

The post Bottom cover for 125mm (Enamel to twin wall adapter) appeared first on Stone & Stoves.

]]> 45° rosette https://stoneandstoves.ie/product/45-rosette/ Fri, 22 Jan 2016 16:33:35 +0000 https://stoneandstoves.ie/?post_type=product&p=6687 5″(130mm) twin wall flue: 5″(130mm) inside diameter, 7″(180mm) outside diameter 6″(150mm) twin wall flue: 6″(150mm) inside diameter, 8″(200mm) outside diameter Item: 45° rosette Designation: EN1856-1 T600-N1-W-Vm-L50050-G60 Inner Material: 316 Stainless Steel – 0.50mm thick Outer Material: 304 Stainless Steel – 0.50mm thick Fuels: Wood, Oil, Gas, Low sulpher coal Approvals: HETAS / CE APPLICATION For use [...]

The post 45° rosette appeared first on Stone & Stoves.

]]> 5″(130mm) twin wall flue: 5″(130mm) inside diameter, 7″(180mm) outside diameter

6″(150mm) twin wall flue: 6″(150mm) inside diameter, 8″(200mm) outside diameter

Item: 45° rosette
Designation: EN1856-1 T600-N1-W-Vm-L50050-G60
Inner Material: 316 Stainless Steel – 0.50mm thick
Outer Material: 304 Stainless Steel – 0.50mm thick
Fuels: Wood, Oil, Gas, Low sulpher coal
Approvals: HETAS / CE

APPLICATION
For use on solid fuel, gas & oil appliances.

CONSTRUCTION
Outer skin is made from 304 grade stainless steel and is 0.5mm thick. The Inner skin is made from 316 grade stainless steel and is 0.5mm thick. Insulation with mineral wool is injected into the chimneys giving a density of 180kg/m3 and is 25 mm thick. All parts are fully welded. Distance to combustibles is 60mm.

APPROVALS
HETAS Approved and is CE marked.
Designation Number
EN1856-1 T600-N1-W-Vm-L50050-G60

INSTALLATION
Use silicone to secure against the wall.

The post 45° rosette appeared first on Stone & Stoves.

]]> Tee 45° with drain plug – twin wall https://stoneandstoves.ie/product/tee-45-2/ Sun, 01 Jun 2014 21:13:30 +0000 https://stoneandstoves.ie/shop/flues/tee-45-2/ CLAMPS & DRAIN PLUG INCLUDED 5″(130mm) twin wall flue: 5″(130mm) inside diameter, 7″(180mm) outside diameter 6″(150mm) twin wall flue: 6″(150mm) inside diameter, 8″(200mm) outside diameter 8″(200mm) twin wall flue: 8″(200mm) inside diameter, 10″(250mm) outside diameter Item: Tee 45° Designation: EN1856-1 T600-N1-W-Vm-L50050-G60 Inner Material: 316 Stainless Steel – 0.50mm thick Outer Material: 304 Stainless Steel – 0.50mm [...]

The post Tee 45° with drain plug – twin wall appeared first on Stone & Stoves.

]]> CLAMPS & DRAIN PLUG INCLUDED

5″(130mm) twin wall flue: 5″(130mm) inside diameter, 7″(180mm) outside diameter

6″(150mm) twin wall flue: 6″(150mm) inside diameter, 8″(200mm) outside diameter

8″(200mm) twin wall flue: 8″(200mm) inside diameter, 10″(250mm) outside diameter

Item: Tee 45°
Designation: EN1856-1 T600-N1-W-Vm-L50050-G60
Inner Material: 316 Stainless Steel – 0.50mm thick
Outer Material: 304 Stainless Steel – 0.50mm thick
Fuels: Wood, Oil, Gas, Low sulpher coal
Approvals: HETAS / CE
Distance to Combustibles: 60mm

APPLICATION
For use on solid fuel, gas & oil appliances.

CONSTRUCTION
Outer skin is made from 304 grade stainless steel and is 0.5mm thick. The Inner skin is made from 316 grade stainless steel and is 0.5mm thick. Insulation with mineral wool is injected into the chimneys giving a density of 180kg/m3 and is 25 mm thick. All parts are fully welded. Distance to combustibles is 60mm.

APPROVALS
HETAS Approved and is CE marked.
Designation Number
EN1856-1 T600-N1-W-Vm-L50050-G60

INSTALLATION
Twin Wall flue parts are secured together by using a clamp (supplied).
Make sure that you keep a distance of 60mm from the outside of the flue to any combustible material (wood, plaster board).

 

 

The post Tee 45° with drain plug – twin wall appeared first on Stone & Stoves.

]]> Twin wall flue 1000mm https://stoneandstoves.ie/product/double-wall-chimney-1000mm/ Sun, 01 Jun 2014 21:09:59 +0000 https://stoneandstoves.ie/shop/flues/double-wall-chimney-1000mm/ CLAMP INCLUDED 5″(130mm) twin wall flue: 5″(130mm) inside diameter, 7″(180mm) outside diameter 6″(150mm) twin wall flue: 6″(150mm) inside diameter, 8″(200mm) outside diameter 8″(200mm) twin wall flue: 8″(200mm) inside diameter, 10″(250mm) outside diameter Item: Double wall chimney 1000mm Designation: EN1856-1 T600-N1-W-Vm-L50050-G60 Inner Material: 316 Stainless Steel – 0.50mm thick Outer Material: 304 Stainless Steel – 0.50mm thick [...]

The post Twin wall flue 1000mm appeared first on Stone & Stoves.

]]> CLAMP INCLUDED

5″(130mm) twin wall flue: 5″(130mm) inside diameter, 7″(180mm) outside diameter

6″(150mm) twin wall flue: 6″(150mm) inside diameter, 8″(200mm) outside diameter

8″(200mm) twin wall flue: 8″(200mm) inside diameter, 10″(250mm) outside diameter

Item: Double wall chimney 1000mm
Designation: EN1856-1 T600-N1-W-Vm-L50050-G60
Inner Material: 316 Stainless Steel – 0.50mm thick
Outer Material: 304 Stainless Steel – 0.50mm thick
Fuels: Wood, Oil, Gas, Low sulpher coal
Approvals: HETAS / CE
Distance to Combustibles: 60mm

APPLICATION
For use on solid fuel, gas & oil appliances.

CONSTRUCTION
Outer skin is made from 304 grade stainless steel and is 0.5mm thick. The Inner skin is made from 316 grade stainless steel and is 0.5mm thick. Insulation with mineral wool is injected into the chimneys giving a density of 180kg/m3 and is 25 mm thick. All parts are fully welded. Distance to combustibles is 60mm.

APPROVALS
HETAS Approved and is CE marked.
Designation Number
EN1856-1 T600-N1-W-Vm-L50050-G60

INSTALLATION
Twin Wall flue parts are secured together by using a clamp (supplied).
Make sure that you keep a distance of 60mm from the outside of the flue to any combustible material (wood, plaster board).

 

The post Twin wall flue 1000mm appeared first on Stone & Stoves.

]]> Elbow 45° – twin wall https://stoneandstoves.ie/product/elbow-45-2/ Sun, 01 Jun 2014 21:08:56 +0000 https://stoneandstoves.ie/shop/flues/elbow-45-2/ CLAMP INCLUDED 5″(130mm) twin wall flue: 5″(130mm) inside diameter, 7″(180mm) outside diameter 6″(150mm) twin wall flue: 6″(150mm) inside diameter, 8″(200mm) outside diameter 8″(200mm) twin wall flue: 8″(200mm) inside diameter, 10″(250mm) outside diameter Item: Elbow 45° Designation: EN1856-1 T600-N1-W-Vm-L50050-G60 Inner Material: 316 Stainless Steel – 0.50mm thick Outer Material: 304 Stainless Steel – 0.50mm thick Fuels: Wood, [...]

The post Elbow 45° – twin wall appeared first on Stone & Stoves.

]]> CLAMP INCLUDED

5″(130mm) twin wall flue: 5″(130mm) inside diameter, 7″(180mm) outside diameter

6″(150mm) twin wall flue: 6″(150mm) inside diameter, 8″(200mm) outside diameter

8″(200mm) twin wall flue: 8″(200mm) inside diameter, 10″(250mm) outside diameter

Item: Elbow 45°
Designation: EN1856-1 T600-N1-W-Vm-L50050-G60
Inner Material: 316 Stainless Steel – 0.50mm thick
Outer Material: 304 Stainless Steel – 0.50mm thick
Fuels: Wood, Oil, Gas, Low sulpher coal
Approvals: HETAS / CE
Distance to Combustibles: 60mm

APPLICATION
For use on solid fuel, gas & oil appliances.

CONSTRUCTION
Outer skin is made from 304 grade stainless steel and is 0.5mm thick. The Inner skin is made from 316 grade stainless steel and is 0.5mm thick. Insulation with mineral wool is injected into the chimneys giving a density of 180kg/m3 and is 25 mm thick. All parts are fully welded. Distance to combustibles is 60mm.

APPROVALS
HETAS Approved and is CE marked.
Designation Number
EN1856-1 T600-N1-W-Vm-L50050-G60

INSTALLATION
Twin Wall flue parts are secured together by using a clamp (supplied).
Make sure that you keep a distance of 60mm from the outside of the flue to any combustible material (wood, plaster board).

The post Elbow 45° – twin wall appeared first on Stone & Stoves.

]]> Twin wall flue 500mm https://stoneandstoves.ie/product/double-wall-chimney-500mm/ Sun, 01 Jun 2014 21:08:01 +0000 https://stoneandstoves.ie/shop/flues/double-wall-chimney-500mm/ CLAMP INCLUDED 5″(130mm) twin wall flue: 5″(130mm) inside diameter, 7″(180mm) outside diameter 6″(150mm) twin wall flue: 6″(150mm) inside diameter, 8″(200mm) outside diameter 8″(200mm) twin wall flue: 8″(200mm) inside diameter, 10″(250mm) outside diameter Item: Double wall chimney 500mm Designation: EN1856-1 T600-N1-W-Vm-L50050-G60 Inner Material: 316 Stainless Steel – 0.50mm thick Outer Material: 304 Stainless Steel – 0.50mm thick [...]

The post Twin wall flue 500mm appeared first on Stone & Stoves.

]]> CLAMP INCLUDED

5″(130mm) twin wall flue: 5″(130mm) inside diameter, 7″(180mm) outside diameter

6″(150mm) twin wall flue: 6″(150mm) inside diameter, 8″(200mm) outside diameter

8″(200mm) twin wall flue: 8″(200mm) inside diameter, 10″(250mm) outside diameter

Item: Double wall chimney 500mm
Designation: EN1856-1 T600-N1-W-Vm-L50050-G60
Inner Material: 316 Stainless Steel – 0.50mm thick
Outer Material: 304 Stainless Steel – 0.50mm thick
Fuels: Wood, Oil, Gas, Low sulpher coal
Approvals: HETAS / CE
Distance to Combustibles: 60mm

APPLICATION
For use on solid fuel, gas & oil appliances.

CONSTRUCTION
Outer skin is made from 304 grade stainless steel and is 0.5mm thick. The Inner skin is made from 316 grade stainless steel and is 0.5mm thick. Insulation with mineral wool is injected into the chimneys giving a density of 180kg/m3 and is 25 mm thick. All parts are fully welded. Distance to combustibles is 60mm.

APPROVALS
HETAS Approved and is CE marked.
Designation Number
EN1856-1 T600-N1-W-Vm-L50050-G60

INSTALLATION
Twin Wall flue parts are secured together by using a clamp (supplied).
Make sure that you keep a distance of 60mm from the outside of the flue to any combustible material (wood, plaster board).

 

The post Twin wall flue 500mm appeared first on Stone & Stoves.

]]> Twin wall flue 250mm https://stoneandstoves.ie/product/double-wall-chimney-250mm/ Sun, 01 Jun 2014 21:06:22 +0000 https://stoneandstoves.ie/shop/flues/double-wall-chimney-250mm/ CLAMP INCLUDED 5″(130mm) twin wall flue: 5″(130mm) inside diameter, 7″(180mm) outside diameter 6″(150mm) twin wall flue: 6″(150mm) inside diameter, 8″(200mm) outside diameter 8″(200mm) twin wall flue: 8″(200mm) inside diameter, 10″(250mm) outside diameter Item: Double wall chimney 250mm Designation: EN1856-1 T600-N1-W-Vm-L50050-G60 Inner Material: 316 Stainless Steel – 0.50mm thick Outer Material: 304 Stainless Steel – 0.50mm thick [...]

The post Twin wall flue 250mm appeared first on Stone & Stoves.

]]> CLAMP INCLUDED

5″(130mm) twin wall flue: 5″(130mm) inside diameter, 7″(180mm) outside diameter

6″(150mm) twin wall flue: 6″(150mm) inside diameter, 8″(200mm) outside diameter

8″(200mm) twin wall flue: 8″(200mm) inside diameter, 10″(250mm) outside diameter

Item: Double wall chimney 250mm
Designation: EN1856-1 T600-N1-W-Vm-L50050-G60
Inner Material: 316 Stainless Steel – 0.50mm thick
Outer Material: 304 Stainless Steel – 0.50mm thick
Fuels: Wood, Oil, Gas, Low sulpher coal
Approvals: HETAS / CE
Distance to Combustibles: 60mm

APPLICATION
For use on solid fuel, gas & oil appliances.

CONSTRUCTION
Outer skin is made from 304 grade stainless steel and is 0.5mm thick. The Inner skin is made from 316 grade stainless steel and is 0.5mm thick. Insulation with mineral wool is injected into the chimneys giving a density of 180kg/m3 and is 25 mm thick. All parts are fully welded. Distance to combustibles is 60mm.

APPROVALS
HETAS Approved and is CE marked.
Designation Number
EN1856-1 T600-N1-W-Vm-L50050-G60

INSTALLATION
Twin Wall flue parts are secured together by using a clamp (supplied).
Make sure that you keep a distance of 60mm from the outside of the flue to any combustible material (wood, plaster board).

 

The post Twin wall flue 250mm appeared first on Stone & Stoves.

]]>