Bottom cover for 125mm (Enamel to twin wall adapter)

Bottom cover for 125mm (Enamel to twin wall adapter) - Image 2

Bottom cover for 125mm (Enamel to twin wall adapter) - Image 3

Bottom cover for 125mm (Enamel to twin wall adapter)

60.00€ inc. VAT

Category: Twin wall flues SILVER

Description
Additional information

Item:	Bottom cover (Adapter from single wall to twin wall flues)
Designation:	EN1856-1 T600-N1-W-Vm-L50050-G60
Inner Material:	316 Stainless Steel – 0.50mm thick
Outer Material:	304 Stainless Steel – 0.50mm thick
Fuels:	Wood, Oil, Gas, Low sulpher coal
Approvals:	HETAS / CE
Distance to Combustibles:	60mm

APPLICATION
For use on solid fuel, gas & oil appliances.

CONSTRUCTION
Outer skin is made from 304 grade stainless steel and is 0.5mm thick. The Inner skin is made from 316 grade stainless steel and is 0.5mm thick. Insulation with mineral wool is injected into the chimneys giving a density of 180kg/m³and is 25 mm thick. All parts are fully welded. Distance to combustibles is 60mm.

APPROVALS
HETAS Approved and is CE marked.
Designation Number
EN1856-1 T600-N1-W-Vm-L50050-G60

INSTALLATION
This adaptor is used to connect from Vitreous enamel (125mm) wall flue into twin wall insulated flue (130mm), when fitting you should make joint with fire cement.
Twin Wall Insulated Chimney parts are secured together by using a clamp.
Make sure that you keep a distance of 60mm from the outside of the flue to any combustible material (wood, plaster board).

Weight	0.5 kg

Bottom cover for 125mm (Enamel to twin wall adapter)

Related products