| Item: | Bottom cover (Adapter from single wall to twin wall flues) |
| Designation: | EN1856-1 T600-N1-W-Vm-L50050-G60 |
| Inner Material: | 316 Stainless Steel – 0.50mm thick |
| Outer Material: | 304 Stainless Steel – 0.50mm thick |
| Fuels: | Wood, Oil, Gas, Low sulpher coal |
| Approvals: | HETAS / CE |
| Distance to Combustibles: | 60mm |
APPLICATION
For use on solid fuel, gas & oil appliances.
CONSTRUCTION
Outer skin is made from 304 grade stainless steel and is 0.5mm thick, then powder coated in a high temperature black finish paint. The Inner skin is made from 316 grade stainless steel and is 0.5mm thick. Insulation with mineral wool is injected into the chimneys giving a density of 180kg/m3 and is 25 mm thick. All parts are fully welded. Distance to combustibles is 60mm.
APPROVALS
HETAS Approved and is CE marked.
Designation Number
EN1856-1 T600-N1-W-Vm-L50050-G60
INSTALLATION
This adaptor is used to connect from Vitreous enamel (125mm) wall flue into twin wall insulated flue (150mm), when fitting you should make joint with fire cement.
Twin Wall Insulated Chimney parts are secured together by using a clamp.
Make sure that you keep a distance of 60mm from the outside of the flue to any combustible material (wood, plaster board).
| Weight | 0.5 kg |
|---|
Related products
FLUES
FLUES
Twin wall flues BLACK
80mm(3″)- to 130mm(5″)- increaser/black (Single to twin wall adapter)
FLUES
Twin wall flues BLACK
80mm(3″)+ to 130mm(5″)- increaser/black (Single to twin wall adapter)
FLUES
Twin wall flues BLACK
130mm(5″) to 150mm(6′) increaser/black (Single to twin wall adapter)
